Air Winch – Ingersoll Rand
| PRICE: | Upon request |
|---|---|
| QUANTITY: | 1 |
| MANUFACTURER: | Ingersoll Rand |
| LOCATION: | - |
| CONDITION: | Used |
| DESCRIPTION: | Air Winch Model: FA5TI 24XK1E Year : 2013 Part no: A024383 SWL 8400 LBS. |
120 mm K4 stud anchor chain
| PRICE: | 2500 NOK / meter |
|---|---|
| QUANTITY: | 5000 Meter |
| MANUFACTURER: | - |
| LOCATION: | Norway |
| CONDITION: | Used |
| DESCRIPTION: | 5000 meter of our 120 mm K4 stud anchor chain with kenter shackles Chain and kenters are in good condition, we used 9000 meter to anchor up the Aasta Hansteen platform at Stord, Norway from 2017 to 2018. All form for documentation upon request. |
CJC PTU2 27/27
| MANUFACTURER: | CJC |
|---|---|
| CONDITION: | NEW |
| LOCATION: | Norway |
| PRICE: | Upon request |
| DESCRIPTION: | The CJCTM Filter Separator PTU2 27/27 Hydraulic is used for hydraulic oils, turbine lube oils and gear oils with a specific weight lower than that of water. The PTU2 27/27 is ideal for separation of water, removal of particles and degradation products. |
Hydraulic pulling winch, 15 T capacity
| MANUFACTURER: | . |
|---|---|
| QUANTITY: | 1 |
| CONDITION: | Used |
| LOCATION: | Norway |
| PRICE: | Upon request |
| DESCRIPTION: | Application Pulling Power source Electric Line pull 15 T maximum on 1st layer Line speed 5 m/min Brake Holding 100 T maximum on mid layer Drum storage 200 meter of 42 mm wire Power supply 380 Volt 50 hz Winch Control Via pendant on winch Winch fastening Bolted directly or welded via base frame deck plates Weight 7000 kg with base frame |
A-frames with capacity 5 – 250 Ton
| MANUFACTURER: | . |
|---|---|
| QUANTITY: | 1 |
| CONDITION: | Used |
| LOCATION: | Norway |
| PRICE: | Upon request |
| DESCRIPTION: | A-frames with capacity 5 – 250 Ton |
Folding crane 1 ton
| MANUFACTURER: | . |
|---|---|
| QUANTITY: | 1 |
| CONDITION: | Used |
| LOCATION: | Norway |
| PRICE: | Upon request |
| DESCRIPTION: | Folding crane 1 ton @ 8 mtrs |
Test weights – steel/concrete
| MANUFACTURER: | . |
|---|---|
| QUANTITY: | 1 |
| CONDITION: | Used |
| LOCATION: | Norway |
| PRICE: | Upon request |
| DESCRIPTION: | Wide range of clump weights up to 800 Tonne per unit. The weights have a space saving design and are used for testing of cranes, winches or other equipment or as a fixed point on sea bed. |
Subsea buoys(different size)
| MANUFACTURER: | . |
|---|---|
| QUANTITY: | 10 |
| CONDITION: | Used |
| LOCATION: | Norway |
| PRICE: | Upon request |
| DESCRIPTION: | • 120 and 250kg buoyancy modules. • 240 and 1200kg buoyancy modules. • 1000 kg modules • 1200 kg modules • 2400 kg modules • 3500 kg modules • 14000 kg surface buoys • Maximum allowable water depth is down to 1500m. We also make special arrangements to join different buoys to get the required net buoyancy. |
Fernders (different dimensions)
| MANUFACTURER: | . |
|---|---|
| QUANTITY: | 1 |
| CONDITION: | Used |
| LOCATION: | Norway |
| PRICE: | Upon request |
| DESCRIPTION: | Some of our fenders is listed below: - - - - 5 off Chain Tyre Net Foam Filled L=5m Ø=2.5m weight 2900kg 4 off Chain Through fenders L=2.9m Ø=1.3m weight 395kg 2 off Sampson fenders L=3,4 Ø=2,4m, weight 1200kg 4 off Yokohama fenders L=4,5 Ø= 2,2m, weight 1400kg |